SaniPLUS : The SaniPLUS is a system that is used to install a dead bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The SaniPLUS pump is to connect with : 1 - This SaniPLUS Upflush Toilet 2 - Any cistern 3 - Any Shower 4 - Any Bath SaniPLUS INSTALLATION : The SaniPLUS is simplicity itself to install ; there are just four connections. 1 - The macerating/pump is to the spigot of a crosswise outlet toilet. 2 - The toilet tank is to the water supply. 3 - The macerating/pump is to the itsy-bitsy diameter discharge pipe work. 4 - The macerating/pump is to the physical phenomenon supply. Then optionally the discharge pipes from the sink, shower and/or bath. SaniPLUS : The interior of the SaniPLUS comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the unstained steel macerator blades and the pump. When the blush is activated, the water flowing into the SaniPLUS a microswitch in the pressure chamber, which in turn starts the motor. The motor is for life in oil filled enclosure. A demotic spindle the impeller and the macerator blades. The moving parts therefore are to an undiluted lowest. Water and integrated waste matter, the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The outward-moving force the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The pump at 10 PSI and pumps the outgoing up to 12 feet and/or 150 feet horizontally. In addition to the toilet waste, SaniPLUS will also dull wastewater from a variety of different sanitary fixtures, specified as : a hand basin, a bath, a bidet and a plumbing fixture. SaniPLUS : engorged 2 year manufacturer warranty for repair or replacement.